KEMA UptimeParts
SKF · GENUINEB-SY 65 TF

Housing Component SY 65 TF

SKF designation SY 65 TF

Price

Quoted live · in 24h

Quoted in KES
1

Add to your quote basket — no payment now. We reply with a firm price and dispatch ETA within 24h. Pay by M-Pesa, mobile money or LPO once you approve.

Live stock · East Africa network

as of 2026-07-17
✓
NBO
Nairobi
—
KLA
Kampala
—
DAR
Dar es Salaam
—
MWZ
Mwanza

In stock — ships 24–48h

Held at Nairobi. Ships 24–48h once your quote is approved; delivered to your nearest office.

Replaces / interchanges

Component SY 513 MComponent YAR 213-2FRecommended product ECY 213

§02 · Overview

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

§03 · Datasheet

Technical specificationSKF verified40 fields

Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, ISO standards

  • Strong
  • Ready to mount
  • Lubricated and sealed bearing
  • Quick locking onto the shaft
  • Cost-effective
ABase width65mm
BWidth of inner ring68.3mm
HHeight of spherical seat centre76.2mm
LOverall length258mm
dBore diameter65mm
A₁Top width44mm
A₅Standout of end cover39mm
B₄Distance from locking device side face to thread centre10mm
H₁Foot height29mm
H₂Overall height150mm
J₆Distance of dowel pins238mm
J₇Axial offset of dowel pins22.5mm
N₄Recommended diameter for dowel pins4mm
R₁Axial position of the housing thread5.5mm
d₁Shoulder diameter of inner ring(≈)82.5mm
s₁Distance from locking device side face to raceway centre42.9mm
Angular position of the housing thread45°
Hexagonal key size for set screw5mm
Load ratings3
CBasic dynamic load rating57.2kN
C₀Basic static load rating40kN
PᵤFatigue load limit1.7kN
Speed1
Limiting speed3,000r/min
Tolerances & run-out1
Limiting speed with shaft tolerance h6—
Bolting5
GRecommended diameter for attachment bolts, mm20mm
JDistance between attachment bolts203mm
NDiameter of attachment bolt hole22mm
N₁Length of attachment bolt hole35mm
Recommended tightening torque for set screw16.5N·m
Lubrication4
DNDiameter of head sphere of grease fitting6.5mm
GNThread of grease fitting1/4-28 SAE-LT
RGHousing thread for the grease fitting1/4-28 UNF
Hexagonal key size for the grease fitting7mm
Other8
G₂Set screwM10x1
CoatingWithout
Material, housingCast iron
Optional end coverSealing, unit
Sealing type, bearingContact, standard
Compliance with standardISO
Seal and flinger on both sidesSealing, bearing
For material handling applicationsPurpose specific